The car is a Blueprinted Champion turbo flex, with a JK falcon motor. It uses plastic gears to reduce friction and wear and a sonic pinion. The bodyshell used was a BPA Ultimate Bentley.
BSL and S32 racing.
This page is dedicated to racers in the BSL and S32. Here you will find all the parts to do the winning with!
1/24 Falcon Production BSL team race.
For 2006 the BSL
team race will use 1/24th Production chassis with a Falcon motor. This was also
a race at the 2005 BSL finals meeting, won by the BSP prepared car below:
The car is a Blueprinted Champion turbo flex, with a JK falcon motor. It uses
plastic gears to reduce friction and wear and a sonic pinion. The bodyshell
used was a BPA Ultimate Bentley.
1/24 production
parts list:
Chassis: Champion or Mossetti
Motor: JK falcon
Body: BPA, EASYSLOT,
JK
Tyres: BSP, JK, Alpha
Gears and drive chain: Axle, oilities, CZ
gears, Camen or Sonic pinions, or
Koford selected spurs and pinions
1/32 Super Production.
Raced in both
BSL and S32 as well as at the BSCRA Production challenge event. BSP cars have
won the BSCRA national title for the last 3 years!
The chassis is a Blueprinted demon powered by a blueprinted Proslot motor with
selected componets. On this class we recommend reverse angled metal gears due
to the severe motor angle. The bodyshell for the 2004 title was a CAT 917-30
and for 2005 a CAT Audi.
1/32 Super production
parts list:
Chassis: Demon
Body: BPA, CAT,
AAA
Motor: Proslot, BSP
Blueprint
Tyres: BSP
Gears and drive chain: Axle, oilities, reverse
angled spur, Camen pinion
1/32 Production.
SPECIAL OFFER. Eurotoy chassis and Falcon motor combo £12.50. The Eurotoy chassis is very light, and is a proven winning chassis at Leicester. Loves wide, open, sweeping corners, just like the UK8!
The novice class
at the BSCRA nationals and also in the S32 and BSL. Super competitive racing
using falcon motors. These cars are also raced extensively at clubs throughout
the country.
BSP cars are raced each week at the highly competitive Leicester club. Shown
above are the Demon chassis (left) and the Eurotoy.
1/32 Production
parts list:
Chassis: Demon or Eurotoy
Motor: JK falcon
Body: BPA, CAT,
AAA
Tyres: BSP
Gears and drive chain: Axle, oilities, CZ
plastic spur, Camen or sonic pinions,or
Koford selected spurs and pinions
1/32 Southern32 G12 Team race (and BSCRA team race).
Group 12 motor
with a chassis of free choice. This is the BSCRA saloon class using le mans
1/32 bodyshells. In this class it is importan to have speed and strength. BSP
have 2 chassis for this, the BASIC
and the Saunders saloon chassis.The Evo2 version
of the Saunders saloon is now out, the BASIC
won the final round of the 2005 Southern 32 championship.
The car is same as the winning combination at the Swindon BOC. Proslot blueprinted
motor, with selected componets powering a BSP built BASIC
chassis. The Gearing was 6/36 with a CAT MG Lola bodyshell.
1/32 Southern32
Le mans G12 partslist:
Chassis: BSP BASIC.
BSP Saunders
Body: BPA, CAT,
AAA
Motor: Proslot, BSP
Blueprint
Tyres: BSP
Gears and drive chain: Axle, oilities, reverse
angled spur, Camen pinion